I have a few devices from Syscomp Electronic
Design that I use for experimenting
and debugging. The CGR-201, shown below, is one of these.
Syscomp sadly lost one of its founders, Peter Hiscocks, and won't be
releasing any new products. I forked their CircuitGear software (screenshot below) to
make some of the changes I wanted, and to start packaging the software
as single-file executables for Linux. My fork is here:
in the src directory. But you'll need Tcl, Tk, and some helper packages.
The single-file executable release contains all of these.
Once you download the executable, you'll have to give yourself permission to run it with something like
chmod a+x yelloscope-1.0.0-linux-x86_64
and your user will have to be in the right group for the software to access the hardware.
For me, on Ubuntu, this group is dialout. I added myself to the group with
sudo adduser john dialout
...and then I had to reboot.
A note on making Starpacks
Starkits and Starpacks are
ways of packaging Tcl programs to reduce or eliminate dependencies.
The makefile in the Yelloscope repository shows how I automate
creating Linux starpacks from Tcl sources. It's customized for my
environment though, and you'll have to change some paths to make it
work. I'll be happy to help if you reach out.
It's important to get the page orientation correct if you think your
Xfig output might ever be printed. I was trying to make a cable
drawing inside a titleblock with Xfig. The postscript output viewed
by qpdfview is shown below.
You can see that this will never print properly, and the ps2pdf
command simply gives you a pdf version of the same problem.
Ghostscript's ps2write device can fix the orientation with:
My AVR-based Arduino workflow is automated by GNU makefiles, which
call avrdude to interact with the
hardware. It's nice to also have the makefile find the Virtual COM
Port (VCP) assigned to the hardware programmer or USB/UART device.
Findcoms is a Tcl script
that finds the device and writes the VCP name to a file. You can then
access this file from your makefile to get the name to avrdude.
From the command line
Findcoms uses a -d parameter to decide which device to detect. Use
-d? to get a list of available d parameters.
I've been trying to figure out a good way to plot some sensor data as it comes in, and I needed a way to simulate that data. I ultimately wanted to get timestamped data into gnuplot, and I knew gnuplot would take time data formatted as Unix Timestamps. I thought, maybe I can use Unix Timestamps with millisecond precision and avoid all the Day/Month/Year formatting. I found out it wasn't going to be that easy.
Gnuplot can accept floating point seconds, but only with the right formatting
Gnuplot won't accept Unix Timestamps with millisecond precision -- the number has to come in as an integer. But it will accept times formatted as %H:%M:%S with floating point seconds. So then I needed to create these millisecond precision stamps. Tcl will give you the milliseconds since 1970, but its clock format command will neither consume this number directly, nor will it consume this number in floating point seconds. The fix, as pointed out by Donal Fellows, is to bolt the seconds and milliseconds together with a format string.
Fakestream creates these stamps to simulate real-time data
I wrote fakestream to continuously write data stamped with these millisecond-precision stamps to a file. The plot below shows gnuplot periodically scanning this file and updating a plot.
The fakestream repository has the Tcl source for this script as well as single file executables for easy distribution. These Starkits and Starpacks are what keep me coming back to Tcl.
I do electronic design for a living, and the CAD package I use
determines the operating system I spend most of my time in. This
means Windows during the day, and Linux at home. Using
Emacs on both platforms gives
me a consistent look and feel. And
Eshell
is a very nice command shell for Windows.
I also need Tcl on both platforms, and
Emacs gives me a nice way to set the
TCLLIBPATH environment
variable. This tells Tcl where to look for packages you bring in with
package require. The TCLLIBPATH variable is a list of paths, and
Tcl needs to be able to make a list variable out of whatever it finds
in TCLLIBPATH. A space-separated list works very nicely. I have this in my .emacs:
;; Get extra emacs packages -- including some useful
;; string-manipulating functions like string-join
(require 'subr-x)
;; Add my local package directory to auto_path. This will be a Tcl
;; list, so the entries should be separated by spaces.
;;
;; Get tklib from https://github.com/tcltk/tklib
(setenv "TCLLIBPATH"
(string-join '("c:/Tcl/lib/local"
"c:/Tcl/lib/local/tklib/modules")
" "))
Why do I need to (require 'subr-x)? The string-join command is
supposed to be part of Emacs 25, but my Emacs 25.2.2 still chokes on
it at startup without the subr-x package. After evaluating .emacs with M-x eval-buffer:
...you can see that the TCLLIBPATH variable is set, and that Tcl uses it in its auto_path list. I originally installed Tcl using ActiveState's installer, which makes its own changes to auto_path.
I have the very interesting Gub package saved here:
and I can now require it with
...to show that auto_path allowed Tcl to find the local package.
I've been working on a PCB for a small loudspeaker project called
Amey. I showed a
rendering of
the bare PCB a few weeks before I sent the design to Slingshot
Assembly in Denver. I got the assembled PCBs today:
They installed the snap-in standoffs at each corner on the component
side, which helps to protect the other components during shipping.
That was a nice touch.
Update -- oops, the ADC doesn't have a clock
I made a showstopper mistake with the rev A boards -- I didn't provide
a clock to the I2S ADC. The
PCM1802 ADC from TI can
be an I2S master, but it has no way of generating its own timebase.
The fix is to figure out how to get a clock to the PCM1802. I made a
second PCB to hold the
DSC60xx
16.9344 MHz oscillator and its bypass capacitor. You can see the second PCB below.
I carefully wired up the little PCB, and now I see the correct clocks:
The Bus Pirate is a
cheap way to talk to I2C (and a lot of other serial protocol) devices
from your laptop. I use it to bring up new boards -- making sure
everything works before they get integrated into a bigger platform.
Specifically, I've been using the Bus Pirate version 4
(BPv4)
shown below.
Dangerous Prototypes has built
the Bus Pirate's API into the hardware with its binary
bitbang
firmware mode. This is great, since it means you don't need a
separate piece of software running on your laptop to run the API --
you can use whatever scripting language you want.
Connecting to the BPv4 is just like connecting to any other USB CDC
(ACM) device. The
version 3 Bus Pirate has an FTDI device to handle the communication,
while the BPv4 moves the USB stack into a Microchip PIC. You'll have
the usual first-time problems: Windows wants an INF file, and Ubuntu
wants your user to be in the same group as the device node. I linked
the INF file I used below.
Once those basics are in place, the details of communicating over the
channel are determined by your choice of scripting language. I use
Tcl for things like this, so I need to use commands like chan
configure. The debug log
shown below shows the script doing a brute-force search of all
connected devices.
I'll go into what this potset script is later. For right now,
notice that the script identified two potential device nodes:
ttyACM0 and ttyACM1. The script will connect with the first
device that reponds to a carriage return with HiZ>. The
busbridge repository shows
how I did things. The BPv4 actually has an eeprom that could be used
to "tag" different Bus Pirates if you wanted to work with more than
one at once.
Going forward
The next step is to activate the BPv4's API to set up SPI or I2C
communication. I'll talk about that later.
The input file is simply Tcl, and is sourced by the main program.
Starting the program with no inputs will create an example.tbi
file in an input directory. This is just some basic organization
-- the program doesn't care about the input file location or its extension.
The seconds_per_inch variable controls how large timeslices will be
relative to their labels. If your timeslice labels don't fit, try
reducing this number.
Creating timeslices
The timeslice::timeslice function creates a timeslice. For example:
set mario_airborne [timeslice::timeslice 100e-3 red "Mario has jumped"]
...creates a 100ms-long red timeslice with a label. Recognized colors
are black, blue, green, cyan, red, magenta, yellow, and
white.
Creating reference lines (timestamps)
The timeslice::reference function creates a reference line. For
example:
set mario_lands [timeslice::reference "Mario lands on goomba"]
...creates a reference line with a label. The program will assign a
timestamp to the reference line depending on where it lands in its
timeline.
Creating timelines
The timeline::timeline function assembles lists of timeslices into a
timeline. For example:
set mario_list [list $mario_airborne $mario_lands $mario_recovers]
set mario_timeline [timeline::timeline "Mario" $mario_list]
...creates the mario_timeline timeline. Notice that the
mario_lands reference line is in the list of timeslices along with
regular timeslices.
Processing the input file
I have a history of creating Tcl software used by manufacturing
technicians. These people usually use Windows machines, and they like
being able to choose which version they can run. My executables thus
have their version numbers in their filenames. Use the -h option to
see the usage:
~/projects/eventual/timebars/starpacks $ ./timebars-1.0.2-win32-ix86.exe -h
timebars usage: timebars [options] filename
-d value Minimum depth <50>
-o value Output file name <timebars.fig>
-- Forcibly stop option processing
-help Print this message
-? Print this message
If you don't specify an input file (call the script with no
arguemnts), the script will generate an input directory and an
example file in that directory.
The "minimum depth" parameter is for Xfig. If you already have
graphics drawn in Xfig and you want to add this figure, you'll need to
make sure the depths cooperate to make overlapping elements visible.